Search Results

Zero-offset in transducer output during airbag noise testing is often observed, but mostly ignored due to the lack of understanding of its causes and implications. In the field of high-g acceleration measurement, this phenomenon is well documented, and is referred to as zeroshift. Zero-offset occurs when a component in the measurement chain is exposed to some unexpected inputs which the component has not been designed to handle. These unexpected inputs can be mechanical, electrical, or optical. How the transducer reacts to such inputs and the amount of zero-offset produced depends on the sensing mechanism, material used, and the design of the component itself. This paper explores the causes of zero-offset from a general perspective, covering the entire measurement chain. Although much of the information and discussions are based on data obtained from acceleration measurement systems, the findings are applicable to other transducer types, such as pressure and acoustic measurements.

This paper describes the ZENITH Nano-Satellite cum planetary atmospheric entry vehicle, called CanSat, the first Nano-Satellite project that has been developed by Delhi Technological University (Formerly Delhi College of Engineering), India. The satellite will function for monitoring the concentrations of various gases in the atmosphere. For this, the satellite consists of arduino microcontroller interfaced with the various Micro-electromechanical system (MEMS) gas sensors for measuring the concentrations of various gases such as carbon dioxide, carbon monoxide, methane, nitrous oxides, ozone, etc. The data obtained from the CanSat will be transmitted to the ground station where all the data will be stored and also the locations will be stored using GPS sensor. The academic goal of this project is to recruit students to the field of space science and technology.

Alcohol amongst our teenagers is the #1 problem facing our young people today. There are many solutions to this problem, which includes prevention and education. New youth organizations, legislation and innovative educational efforts are being offered to those who wish to become involved in helping solve this problem.

Students share how SAE Membership has opened doors for their careers, provided educational opportunities and hands-on experiences that has helped them to become a better engineer.

Career development planning is critical to getting the most out of one's working years. It should start when one starts a career, but even if you start in mid-career, it's not too late. For those who haven't done it, career planning may seem difficult and confusing. Increasingly, your community library and state employment service agency provides valuable help in the form of computerized and manual aids to career planning and job-getting. This article follows Dave Brown, a mid-career engineer, through the career-planning process, introduces library and government resources to you and provides a list of computer programs relating to career planning and job getting.

A novel method for suppressing frictional vibration in sliding systems without using additional devices (e.g., dampers or actuators) is theoretically proposed. This method is based on the principle that yawing angular misalignment provides positive damping to sliding systems. Even if frictional vibration occurs due to a negative slope of the friction versus velocity characteristic, it can be suppressed by applying a misalignment angle φ that is larger than the critical misalignment angle φcr. To examine the basic applicability of this method to disc brake systems, a braking test at a constant normal load was simulated numerically. It was found that yawing angular misalignment can not only suppress frictional vibration but also shorten the braking time as a secondary effect of suppressing frictional vibration.

In this paper a yaw stability control algorithm along with an emergency roll control strategy have been developed. The yaw stability controller and emergency roll controller were both developed using linear two degree-of-freedom vehicle models. The yaw stability controller is based on Lyapunov stability criteria and uses vehicle lateral acceleration and yaw rate measurements to calculate the corrective yaw moment required to stabilize the vehicle yaw motion. The corrective yaw moment is then applied by means of a differential braking strategy in which one wheel is selected to be braked with appropriate brake torque applied. The emergency roll control strategy is based on a rollover coefficient related to vehicle static stability factor. The emergency roll control strategy utilizes vehicle lateral acceleration measurements to calculate the roll coefficient. If the roll coefficient exceeds some predetermined threshold value the emergency roll control strategy will deploy.

A new controllable limited slip differential is proposed and tested in software environment. It is characterized by the employment of a magnetorheological fluid, which presents the property of changing its rheology thanks to an applied magnetic field. A vehicle model has been designed and employed for the synthesis of a sliding controller. The control is based on a double level scheme: the upper controller aims to generate the target locking torque, while the lower controller generates, as control action, the supply current for the controllable limited slip differential. The obtained results show the effectiveness of the device in terms of vehicle dynamics improvement. Indeed, the results reached by the vehicle in presence of the new differential confirm the improved performances for both steady and unsteady state manoeuvres.

A new chain saw powered by rotary engine has been developed with a view to prevent the current injuries due to vibration from chain saws. This paper covers the construction of the rotary engine and performances of the new chain saw including vibration measurements. Vibration acceleration of the new chain saw shows so low level compared with reciprocating engine saws that it would be quite promising for prevention of the vibration injuries.

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

This specification covers one type of organic fiber in the form of yarn. The product shall be formed as a multiplicity of filaments drawn together and gathered into an approximately parallel arrangement.

Our conference chairman told me that this special technical section was structured to provide “some words of wisdom from the old guys” or something to that effect. I know I can meet most of his requirements. I am a pensioner and an oak tree. However, “words of wisdom” maybe a challenge. Solving noise problems, setting acoustical performance targets and guidelines, and developing noise control systems for new and carry-over vehicles can be very challenging and time consuming particularly in today's culture. In the 1970's and 80's, and 90's we had the same challenges. Our customers demanded and appreciated a quiet vehicle. They want to talk to each other without shouting or to enjoy a favorite music selection regardless of weather, road conditions, or vehicle speed. The use of ear plugs or cotton is not acceptable! Noise Gremlins (Figure 1) can ruin a good day!

XEROX has developed and implemented a network architecture for a real time control system which has expansion flexibility, high reliability, noise immunity, and low cost. This two level multiplex system with a single wire system bus at one level for distributed processors connected to local serial buses at the second level for remote functions and loads is described. The XEROX Microelectronics Center has developed a set of custom VLSI chips to implement the multiplexing architecture. Control software was developed using both assemblers and high level language tools. The software and chip set have been designed, built and integrated into XEROX'S latest generation of products.

Five XC-142 aircraft have been manufactured to provide operational prototypes of a V/STOL tactical transport for tri-service evaluation. This paper presents a description of the flight control and stability augmentation systems. Special emphasis is placed on the programmed functions which are characteristic of VTOL airplanes. Proposed changes in the control systems of production models of the C-142 are identified, and the simulation and flight test programs are outlined.

The X-38 vehicle will be used to demonstrate the future technology on durable TPS for the CRV. Astrium has produced two large CMC Nose Skirt side panels for the current X-38 configuration. The design of the 3 dimensional curved and large side panels comprises a light-weight, stringer stiffened concept which compensates the thermal expansion by a system of flexible metallic stand-offs. An optimum in flexibility and stiffness to fulfil all requirements had to be found: strong and stiff enough to carry the thermo-mechanical loads, but flexible enough to realise a fastening concept which does not fail due to thermal expansion. The fastening concept has been tested on development test level. Some thermal and mechanical tests on sub-structure level confirmed the design and analysis work of the complete TPS concept.

Agile aircraft (X-29, X-31, F-18 High Alpha Research Vehicle, & F-16 Multi-Axis Thrust Vector) test pilots, while flying at high angles of attack, experience difficulty predicting their flight path trajectory. To compensate for the loss of this critical element of situational awareness, the X-31 International Test Organization (ITO) installed and evaluated a helmet mounted display (HMD) system into an X-31 aircraft and simulator. Also investigated for incorporation within the HMD system and flight evaluation was another candidate technology for improving situational awareness - three dimensional (3D) audio. This was the first flight test evaluating the coupling of visual and audio cueing for aircrew aiding. The focus of the endeavor, which implemented two visual and audio formats, was to examine the extent visual and audio orientation cueing enhanced situational awareness and improved pilot performance during tactical flying.

LiquidPiston Inc. has developed a new engine that can run on multiple fuels, including diesel, jet fuel, and gasoline. This platform uses an optimized thermodynamic cycle and a new rotary engine architecture and could increases flight endurance over conventional UAV engines by greater than 50%.

Battery electric vehicles (BEVs) are equipped with Mobile Air Conditioning systems (MACs) to ensure a comfortable cabin temperature in all climates and ambient conditions as well as the optional conditioning of the traction battery. An assessment of the global electrical energy consumption of various MACs has been derived, where the basis of the assessment procedure is the climate data GREEN-MAC-LCCP 2007 (Global Refrigerants Energy & Environmental - Mobile Air Condition - Life Cycle Climate Performance) and the improved LCCP2013 (Life Cycle Climate Performance. The percentage driving time during 6 AM and 24 PM is divided into six different temperature bins with the solar radiation and relative humidity for 211 cities distributed over Europe, North, Central, and South America, Asia, South West Pacific, and Africa. The energy consumption of the MACs is determined by a thermal vehicle simulation. In this work, four different MACs are simulated and compared.